info@awindowsdoors.com

Price
calculators

  • Product: Select
    uPVC Windows uPVC Doors Balcony Enclosures Security Doors Garage Doors Blinds Shutters Screens
  • Type: Select
    uPVC Tilt and Turn Windows 1 Fixed 1 Operable uPVC Windows 2 Operable Sashes uPVC Windows 2 Fixed 1 Operable uPVC Windows 1 Fixed 2 Operable uPVC Windows 2 Fixed 2 Operable uPVC Windows uPVC Tilting Hopper Windows uPVC Fixed Picture Windows uPVC Fixed Windows Two Panels uPVC Arched Windows
  • Profile: Select
    Economy budget profile Passive house profile Casement window profile
  • Measurements: 500 * 500

    Enter the measurements in millimetres (height * width)

    *
    height: 500 - 2100, width: 500 - 1600
  • Colour: Select
    Exterior white interior white Exterior with colour interior white Exterior with colour interior with colour
  • Glazing: Select
    DOUBLE GLAZING: Clear float glass Frosted glass Tinted glass Decorative glass Safety glass Solar control glass TRIPLE GLAZING: Clear float glass Frosted glass Tinted glass Decorative glass Safety glass Solar control glass
  • Hardware Accessories: Select
    Gradual tilt Locking handle Security handle
  • Air Vents: Select
    No air vent Vertical air vent Glazed-in air vent Autonomous air vent
  • Interior Sills: Select
    No interior sill MDF white MDF with colour uPVC white uPVC with colour
    Width :
  • Exterior Sills: Select
    No exterior sill Galvanized tin Galvanized tin with colour
    Width :
  • Window Grids: Select
    No window grids Grids inside the glazing Grids on the glazing
    Number of vertical bars :
    Number of horizontal bars :
  • Installation: Select
    Without installation Including installation Delivery only
  • Extras: Select
    Foil tape inside Joint sealing tape Foil tape outside Window maintenance kit Warm edge spacer

Roller Shutter Installation

Roller Shutter Installation

Roller Shutter Installation Price Calculator

Select the desired installation and delivery options to calculate the price. All prices for roller shutter installation and delivery are calculated approximately and may change depending on the distance of delivery.

  • Select “Without installation”, if roller shutters are to be picked up at the factory.
  • Select “Including installation”, in order to calculate the approximate price of roller shutter installation.
  • Select “Delivery only”, if roller shutters are to be delivered to an address not far away.

Note:
If you have questions about roller shutter installation and delivery, please send us an e-mail

Roller Shutter Installation Prices

Roller shutter installation prices are low, so it is worth using this service. A specialist will fit the roller shutters correctly and in a short time, so you can sit back and enjoy the security and comfort that roller shutters bring.

Roller Shutter Installation Step by Step

Roller shutters must be installed according to the guidelines, in order to achieve their maximum strength and durability. Therefore, installation of roller shutters should be entrusted to an experienced specialist. Roller shutter installation process is described below. This description is relevant to standard roller shutters that are manually controlled by a strap. Note: roller shutters all differ in their construction, so the installation procedure may be different from the one outlined below.
1.  Fixing points of guide rails are marked on the frame of the wall / window.
2.  A pencil is used to mark the outer limits of guide rails on the top and sides.
3.  Roller shutter strap is traced into the interior side of the room. First of all, the location of the hole to be drilled is marked. This will be on the specified side, either left or right. The hole is placed above the guide rail, with the centre of the hole being 15 mm away from the top of the guide rail, and 15 mm away from the outside edge of the guide rail. The hole should be drilled in a 13 mm diameter.
4.  A spring is set inside the hole. If the spring is too long, it is trimmed; if the spring is too short, it can be extended.
5.  Roller shutter guide rails are attached to the shutter box.
6.  Roller shutter construction is held against the wall. Control strap is traced through the hole into the room.
7.  Roller shutter guide rails are fixed on the wall in designed locations.
8.  Screws are covered with decorative caps.
9.  Control strap is fixed in the designed place on the interior wall.   
10.  Roller shutters are tested for any irregularities.

Roller Shutter Installation Guarantee

Roller shutter installation has no separate guarantee, but is included in the general guarantee of roller shutters, which is outlined in the agreement to be signed prior to the manufacturing process.

Price offer

Select a product and calculate the price

My shopping cart:

Total price: Eur

Discount: - 0 Eur

Total incl. discount: 0 Eur

Consult a specialist
Review the cart
Discount rate depends on the total price. All prices are calculated approximately. For the final price, please contact our staff.

Contact us

info@awindowsdoors.com